Installation Guide

ManualsBrandsCMI ManualsBathroomAegean Polished Chrome 1-Handle Vessel WaterSense Bathroom Sink Faucet with Drain

Revised 4/24/17

In the event that Freendo faucets are used in a Commercial Application, this warranty is limited for

a period of 5 years, unless otherwise specifically stated in the catalog and/or price book.

Model No. : 192-6443 Polished Chrome

192-6444 Brushed Nickel

192-6445 Oil-Rubbed Bronze

Single Hole Installation

works with overflow or no-overflow bathroom sinks

Aegean Single Handle Vessel Faucet With

Dual Function Pop-up Drain

repair. Compass Manufacturing International will, at its discretion, provide new or equivalent replacement

parts for any product that proves to be defective under normal usage and service.

2017.04.29

Summary of content (4 pages)

PAGE 1
2017.04.29 Model No. : 192-6443 192-6444 192-6445 Polished Chrome Brushed Nickel Oil-Rubbed Bronze In the event that Freendo faucets are used in a Commercial Application, this warranty is limited for a period of 5 years, unless otherwise specifically stated in the catalog and/or price book. repair. Compass Manufacturing International will, at its discretion, provide new or equivalent replacement parts for any product that proves to be defective under normal usage and service.
PAGE 2
and/or Silicone 34 Allen Key 33 Aerator 32 Stopper Housing(With Overflow Hole) 31 Nut 30 Outlet Pipe 29 28 Washer Locknut 27 Washer 26 Washer 25 Stopper Housing(Without Overflow Hole) 24 Stopper Core 23 Washer 22 Cover 21 Screw 20 Locknut 19 Clamp 18 17 O-ring Base 16 Shank 15 Body 14 Screen Filter 13 Adapter 12 O-ring 11 Screw 10 Waterway 9 Flow Restricter 8 O-ring 7 O-ring 6 Cartridge 5 Cartridge Locknut 4 Trim Cap 3 Handle 2 Set Screw 1 Inde
PAGE 3
Faucet Installation 3 4 2 1 5 6 15 33 34 7 8 9 18 10 11 22 23 24 19 20 32 25 21 16 17 18 19 12 13 14 20 21 26 27 28 29 30 31 1. Position the faucet in order on the countertop as shown. Don't forget the O-ring 18 . 2. Assemble clamp 19 and locknut 20 to faucet shank by hand and tighten the screws 21 with the screwdriver.
PAGE 4
1. Remove old drain assembly. Clean all sink surfaces to remove old putty and dirt before installing new drain. Disassemble new pop-up assembly: remove nut 31 , outlet pipe 30 , washer 29 , locknut 28 , washer 27 and washer 26 . 30 B. C. Warning: The supply valves and supply lines are not included. 31 If the faucet is installed in a sink with overflow, follow step 2. Otherwise, please skip to step 3. 2. Unscrew the cover 22 counterclockwise by hand.