Installation Guide

ManualsBrandsCMI ManualsKitchenMajestic Polished Chrome 1-Handle Deck-Mount High-Arc Handle Kitchen Faucet (Deck Plate Included)

Model No. : 192-6465 Polished Chrome

Revised 5/11/17

In the event that Freendo faucets are used in a Commercial Application, this warranty is limited for

a period of 5 years, unless otherwise specifically stated in the catalog and/or price book.

repair. Compass Manufacturing International will, at its discretion, provide new or equivalent replacement

parts for any product that proves to be defective under normal usage and service.

Majestic Handle High Arc Pull-Down

Kitchen Faucet

3 Hole or Single Hole Installation

192-6466 Brushed Nickel

192-6467 Oil-Rubbed Bronze

Summary of content (4 pages)

PAGE 1
Model No. : 192-6465 192-6466 192-6467 Polished Chrome Brushed Nickel Oil-Rubbed Bronze In the event that Freendo faucets are used in a Commercial Application, this warranty is limited for a period of 5 years, unless otherwise specifically stated in the catalog and/or price book. repair. Compass Manufacturing International will, at its discretion, provide new or equivalent replacement parts for any product that proves to be defective under normal usage and service.
PAGE 2
34 33 Allen Key Weight 32 Under-plate Seal 31 Under-plate 30 Deck Plate 29 28 Screw Locknut 27 Clamp 26 25 Protective Sleeve Shank 24 Quick Connect Assembly 23 Stop Valve 22 Assembly 21 Screw 20 O-ring Body 19 17 Cartridge Base Cartridge 18 16 Cartridge Locknut 15 Trim Cap 14 Handle 13 Set Screw Index 12 11 Plumber's Putty and/or Silicone Screwdriver 9 O-ring Retainer Connector 8 Ring 7 O-ring 6 Spray 5 Stop Valve 4 3 Pull-out Hose Ring 2 Hose Guide 1 Spout
PAGE 3
1 2 7 3 4 9 12 13 10 14 11 5 6 6 8 15 16 19 18 30 17 31 32 20 27 28 29 21 24 4 33 30 22 31 32 33 23 24 34 25 26 27 28 29 1. Assemble deck plate 30 , under-plate 31 and under-plate seal 32 to faucet. 2. Position faucet on countertop. 3. From underneath the countertop, assemble clamp 27 and locknut 28 and screw 29 . Tighten the locknut by hand and secure the screws with the screwdriver. 4. Connect pull-out hose 4 to quick connect assembly 24 .
PAGE 4
A. C. Warning: The supply valves and supply lines are not included. 6 27 28 29 B. 24 4 33 1. Position faucet on countertop. 2. From underneath the countertop, assemble clamp 27 and locknut 28 and screw 29 . Tighten the locknut by hand and secure the screws with the screwdriver. 3. Connect pull-out hose 4 to quick connect assembly 24 . CAUTION: Make sure hose is properly engaged and secure in quick connect assembly. 4. Fix the weight 33 to the pull-out hose 4 . 5.