Compass Q Manufacturer ATONAL Overspends fondants LIMITED LIFETIME WARRANTY Compass Manufacturing International warrants to the original consumer purchaser that the faucet be free from defects In material and workmanship for 2s long as the original consumer purchaser owns the home in which the faucet was first installed.
Helpful Tools Tools: Gather the necessary tools as shown below to complete the installation of this faucet. Some may not be needed depending on the model of faucet you are installing.
. Assemble deck plate @ and gasket @3 to faucet. . Position faucet on counter top. . From underneath the counter top, assemble clamp and lockout @ and screw (9. Tighten the lockout by hand and secure the screws with the screwdriver. . Connect supply lines to water supply valve. (supply valves and supply lines are not included). CAUTION: DON'T OVER TIGHTEN THE SUPPLY LINES. OTHERWISE IT MAY DAMAGE THE WASHERS AND NUTS OF THE SUPPLY LINES AND THIS COULD CAUSE THEM TO LEAK. 5.
Position faucet on counter top. . From underneath the counter top, assemble clamp @ and lockout And screw @. Tighten the lockout by hand and secure the screws with the screwdriver. . Connect supply lines to water supply valve. (supply valves and supply lines are not included). CAUTION: DON'T OVER TIGHTEN THE SUPPLY LINES. OTHERWISE IT MAY DAMAGE THE WASHERS AND NUTS OF THE SUPPLY LINES AND THIS GOULD CAUSE THEM TO LEAK. . Remove spray (From faucet and flush water through faucet to remove any debris. .