Compass @ Manufacturer ATONAL Forefront forgets LIMITED LIFETIME WARRANTY Compass Manufacturing International warrants to the original consumer purchaser that the faucet be free from defects In material and workmanship for 2s long as the original consumer purchaser owns the home in which the faucet was first installed. In the event that Doreen faucets are used n a Commercial Application, this warranty s lifted for overload of 5 years, unless otherwise specifically stated In the catalog and/or price book.
=} Helpful Tools Tools: Gather the necessary tools as shown below to complete the installation of this faucet. Some may not be needed depending on the model of faucet you are installing. Plumber's Putty Flashlight Basin Wrench Safety Glasses Ss a5 Screwdriver Pullers Channel Locks Adjustable Ranch Maintenance Your new faucet Is designed for years of trouble-free performance. Keep It looking new by cleaning It periodically with a soft, damp cloth.
A. Faucet Shank B Faucet Shank C Faucet Shank : Connect to water supply lines with either: 0.D. Copper tubing (ball nose risers with the coupling nuts or; Copper tubing (no ball) with supplied tube head interior connector or; {C) IPS faucet connectors (12") Warning: The supply lines are not included. Important: Remove the aerator assembly (#32) by hand. Do NOT use pliers to remove the aerator assembly (#32) as this may cause damage. Turn on the hot and cold water for one minute.
14 14 1. Shut off the water supplies before installation. Remove the current faucet. Clean and dry the surface the new faucet will installed on. 2. Unscrew the lock nut (#14) from the brazed under body Note: Do not remove the customer service tag with the medal number and phone number. This information will be needed when calling the customer service department. 3. Place silicone sealant beneath the gasket (#13) and insert the brazed under body through the faucet holes. 4.