User's Guide

Wall mounting points
For concrete wall mount, do the steps that follow:
1. Put marks on the wall through the holes of plate by using a marker.
2. Drill the marked points by using a electric drill.
3. Attach the anchor bolts to the holes by using a hammer.
4. Attach the plate to the wall with the screws.
3. Connect the power cable and peripherals cables, if necessary, to the connectors in the rear
panel. (See Connecting Cables for more information)
4. Remove one or more plastic tabs to allow the wire routing and let the cables go through the
opening.
Removable tabs
www.cmi-tech.com
(c) 2020, all rights reserved
Page
13 of 28
NovaFace User Guide, 0.1
May 2020