User's Guide

Table Of Contents

3. Using NovaFace

3.1. Enrollment

This section gives the procedural information to enroll users to the device.

1. Press the User button on the main screen.

2. Press Enroll in the bottom.

3. Type ID and Name.

4. Press one or more credential type buttons (Face, Card, PIN) to add to the user.

◦

For Face, let the user stand in front of device and complete the face capture.

◦

For Card, put the card on the device’s card reader. When the CSN (card serial number)

appears on the screen, press OK.

◦

For PIN, press the PIN numbers and press OK.

5. Press OK to complete the enrollment.

3.2. Authentication

NovaFace detects and displays the subject’s face over 1.6 meters from the system on the high-

resolution color display. The subject will simple and naturally walk toward the face capture

range of .5 to 1.0 meter. Once the system recognizes the subject, the result will be displayed

immediately with indication line over the subject’s face image.

1. Go near and look at the device. The image will be changed from monochrome to color

when your face is detected.

2. Authentication result is displayed on the top of the screen depending on whether your face

is recognized successfully.

NovaFace User Guide, 0.1

May 2020

Page

16 of 28