User's Guide

Safety Instructions
Follow the safety instructions to use the product safely and prevent any risk of personal injury
or damage to the product.
WARNING
Choosing Location
DO NOT expose the product to direct sunlight, excess heat, open flames, corrosive
gasses, moisture, or dust. Doing so may cause electrical shock, electrical short, or fire.
DO NOT install the product near heaters, air conditioners, electrical fans, refrigerators,
or water. Doing so may create the risk of a short circuit or fire caused by water or
condensation that may come into contact with the product.
DO NOT install the product in an environment that is susceptible to explosion.
Operation
DO NOT let any type of liquid, mists, or sprays get into the product. Doing so may cause
electrical shock, electrical short, or product damage.
If smoke, odors or noise rise from the device, stop using the device immediately,
disconnect the power cable, and contact our customer support.
Maintenance
DO NOT attempt to dissemble, repair, or modify the device yourself. Opening or
removing covers may expose you to electrical shock or other risks and may void your
warranty. If the product does not work correctly, contact your dealer or our customer
support.
CAUTION
Choosing Location
Keep the front side of the device away from strong ambient light, direct sunlight, or
both. Sunlight, halogen lamps or other strong illumination may degrade the
performance of the device, that is, increase in failure-to-capture rates or occasional
authentication problem.
DO NOT install the product outdoors unless environmental factors such as water,
temperature, or sunlight in the location are controlled by means of proper protection.
DO NOT expose the product to high electro-magnetic radiation. Device failure or
performance degradation may occur caused by electro-magnetic interference.
DO NOT install the product next to devices that contain magnets or generate magnetic
www.cmi-tech.com
(c) 2020, all rights reserved
Page
iv of 28
NovaFace User Guide, 0.1
May 2020