Manual

ASSEMBLY FITTING INSTRUCTIONS
FOR INSTALLATION OF CMP CABLE
GLAND TYPE “E”
FOR TERMINATION OF CABLES WITH WIRE BRAID, TAPE ARMOUR (STA/DSTA), STRIP ARMOUR &
SINGLE WIRE ARMOUR (SWA) (WITH LEAD INNER SHEATH ON “E2” VARIANT).
CMP Document No. FI417 Issue 2 06/11
Glasshouse Street • St. Peters • Newcastle upon Tyne • NE6 1BS
Tel: [phone] • Fax: [phone]
E-Mail: [e-mail] • Web: www.cmp-products.com
DUBAI • HOUSTON • NEWCASTLE • SINGAPORE • SHANGHAI • PUSAN • PERTH
www.cmp-products.com
Cable Gland Selection Table
CMP PRODUCTS
CABLE GLAND TYPES
CABLE GLAND TYPES
E1W, E2W, E1X, E2X,
E1W, E2W, E1X, E2X,
E1U & E2U
E1U & E2U
TECHNICAL DATA
CABLE GLAND TYPE : E** Family of Glands
INGRESS PROTECTION : IP66, IP67, IP68
PROCESS CONTROL SYSTEM : BS EN ISO 9001
INSTALLATION INSTRUCTIONS
Installation should only be performed by a competent person using the correct tools. Read all instructions before beginning installation.
ACCESSORIES
The following accessories are available from CMP Products, as optional extras, to assist with fixing, sealing and earthing :-
Locknut | Earth Tag | Serrated Washer | Entry Thread (I.P.) Sealing Washer | Shroud *
Order codes shown are for E1W glands
For e.g. E1X glands substitue E1W for E1X - e.g. 20E1X1RA
Please note that the overall maximum cable bedding diameter for “E2” variants should be reduced by 1mm to allow for the inner lead sheath.
E1W - SWA Armour
E2W - SWA Armour for lead
sheathed cable
E1X - Braid, Tape, etc Armour
E2X - Braid, Tape, etc Armour
for lead sheathed cable
E1U - Universal Gland for all
Armour Types
E2U - Universal Gland for all
Armour Types with lead
sheathed cable
C
able
Gland
S
ize
Available Entry Threads
M
in
Thread
L
ength
Cable Beding
Diameter
Overall Cable
Diameter
Armour Range
Across
Flats
Across
Corners
P
rotrusi
on
L
ength
O
rdering
Reference
(
Brass Metric)
P
VC
Shroud
R
eference
Standard Option Grooved Cone Stepped Cone
Metric NPT NPT Min Max Min Max Min Max Min Max Max Max
20S/16 M20 1/2” 3/4” 15.0 3.1 8.6 6.1 11.5 0.0 1.0 0.9 1.0 24.0 25.9 58.5 20S16E1W1RA PVC04
20S M20 1/2” 3/4” 15.0 6.1 11.6 9.5 15.9 0.0 1.0 0.9 1.25 24.0 25.9 58.5 20SE1W1RA PVC04
20 M20 1/2” 3/4” 15.0 6.5 13.9 12.5 20.9 0.0 1.0 0.9 1.25 30.5 32.9 60.5 20E1W1RA PVC06
25S M25 3/4” 1” 15.0 11.1 19.9 14.0 22.0 0.0 1.0 1.25 1.6 37.5 40.5 67.5 25SE1W1RA PVC09
25 M25 3/4” 1” 15.0 11.1 19.9 18.2 26.2 0.0 1.0 1.25 1.6 37.5 40.5 67.5 25E1W1RA PVC09
32 M32 1” 1-1/4” 15.0 17.0 26.2 23.7 33.9 0.0 1.0 1.6 2.0 46.0 49.7 69.5 32E1W1RA PVC11
40 M40 1-1/4” 1-1/2” 15.0 22.0 32.1 27.9 40.4 0.0 1.0 1.6 2.0 55.0 59.4 78.0 40E1W1RA PVC15
50S M50 1-1/2” 2” 15.0 29.5 38.1 35.2 46.7 0.0 1.0 2.0 2.5 60.0 64.8 75.5 50SE1W1RA PVC18
50 M50 2” 2-1/2” 15.0 35.6 44.0 40.4 53.1 0.0 1.0 2.0 2.5 70.0 75.6 80.5 50E1W1RA PVC21
63S M63 2” 2-1/2” 15.0 40.1 49.9 45.6 59.4 0.0 1.0 2.0 2.5 75.0 81.0 91.5 63SE1W1RA PVC23
63 M63 2-1/2” 3” 15.0 47.2 55.9 54.6 65.9 0.0 1.0 2.0 2.5 80.0 86.4 92.0 63E1W1RA PVC25
75S M75 2-1/2” 3” 15.0 52.8 61.9 59.0 72.1 0.0 1.0 2.0 2.5 89.0 96.1 99.0 75SE1W1RA PVC28
75 M75 3” 3-1/2” 15.0 59.1 67.9 66.7 78.5 0.0 1.0 2.5 3.0 99.0 106.9 102.0 75E1W1RA PVC30
90 M90 3” 3-1/2” 15.0 66.6 79.9 76.2 90.4 0.0 1.6 3.0 3.5 114.0 123.1 120.0 90E1W1RA PVC32
100 M100 - - 15.0 76.0 90.9 86.1 101.5 0.0 1.6 3.15 4.0 123.0 132.8 148.0 100E1W1RA 150/50HST
115 M115 - - 15.0 86.0 97.9 101.5 110.3 0.0 1.6 3.15 4.0 133.4 144.1 169.0 115E1W1RA 180/60HST
130 M130 - - 15.0 97.0 114.9 114.2 123.3 0.0 1.6 3.15 4.0 146.0 157.8 183.0 130E1W1RA 180/60HST
Dimensions are displayed in millimeters unless otherwise stated