Install guide

Technical specifications
Input/output
Video X20: 2 x input
X40: 4 x input
• connector
BNC
• impedance 75 ohm, switchable
• signal Analog composite, 0.7 to 1.2 Vpp, NTSC or
PAL
Audio
2 x mono line in, 1 x mono line out
• connector 2 x 3.5 mm stereo jack
• signal line in
9 kohm typical, 5.5 Vpp max
• signal line out 3.0 Vpp at 10 kohm / 1.7 Vpp at 16 ohm
typical
Alarm 4 x input
• connector
Clamp (non-isolated closing contact)
• activation
resistance
10 ohm max
Relay 1 x output
• connector
Clamp
• signal 30 Vpp (SELV), 200 mA
COM port Clamp, RS‑232/422/485
Video
Standards H.264 Main Profile, H.264 Baseline Profile
(ISO/IEC 14496‑10)
Data rates
9.6 kbps to 6 Mbps per channel
GOP structure I, IP, IPBB, IBBRBP
Overall IP delay 120 ms
Frame rate
1 to 25/30 (PAL/NTSC)
Audio
AAC
• Profile
AAC-LC
• Frequency
range
300 Hz to 6.4 kHz
• Data rate
48 kbps at 16 kHz sampling rate
G.711
• Frequency
range
300 Hz to 3.4 kHz
• Data rate
80 kbps at 8 kHz sampling rate
L16
• Frequency
range
300 Hz to 6.4 kHz
Audio
• Data rate
640 kbps at 16 kHz sampling rate
Signal-to-noise ratio > 50 dB
Network
Ethernet 10/100 Base‑T, auto-sensing, half/full duplex,
RJ45
Protocols IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP,
IGMP V2/V3, ICMP, RTSP, FTP, Telnet, ARP,
DHCP, SNTP, SNMP (V1, MIB‑II), 802.1x,
SMTP, iSCSI, UPnP (SSDP)
Encryption
TLS 1.0, SSL, AES (optional)
Control
Software update Flash ROM, remote programmable
Configuration Configuration Manager or Web browser
Camera control
Via serial interface;
supported* protocols and devices:
• Bosch AutoDome, HSPT, MIC1-300 IP, TC8x00
• Canon VCC1, VC-C4R
• CBC
SMD 12P/12PII/20P
• JVC TK-C676
• Panasonic WV-CS850
• Pelco
Spectra D/P
• Sensomatic SpeedDome Ultra
• Sony EVI D30/31/D100
• Ultrak
KD6
• VT VPT4x
* Basic functions only, no claim for full
functionality valid. Bosch may not be made
responsible if functions are not implemented
or not working under all circumstances.
Storage medium
CompactFlash 1 x CF slot for optional standard Type I/II
CompactFlash memory card, 2 TB
Electrical
Power supply Via external unit
Input voltage
12 VDC
Current
consumption
0.75 A
Power consumption Approx. 9 W
4 | VideoJet X20/X40 XF E H.264 Video Encoder
EXHIBIT B
5/7/2013 - LBUSD - BOSCH SECURITY CAMERA SYSTEMS
112 of 183