User guide

Dedicated Micros ©2008
13
CMT User Guide
7. If the import is successful, the message “Imported!” will be displayed in the CSV
Import window.
Figure 10 CSV Import – Messages
8. Click the Done button when import process is complete
9. A transaction will be held at the Update DVR Tab for each DVR added in the import
process. To complete the process click on the Update DVR Tab, press the Update
DVR(s) button to send all pending transactions to the actual DVRs.
10. For more information on these transactions, refer to the Update DVR Tab Section.
11. A Restore Point will automatically be created any time a DVR is added to CMT to
capture the Conguration prior to adding it to CMT.
12.
For more information on Restore Points, refer to the Copy/Restore Tab Section.
Add a DVR - Below Minimum Version
1. CMT requires that all DVRs are running Firmwre V4.3 or above. If a DVR is below
this version of Firmware, the following message will be displayed and this will not
be added to CMT.
2. Please contact DM’s Technical Support (Tel:[phone] or Tel:[phone]) for
information on the manual procedures to upgrade the rmware on this particular
model of DVR.
Delete a DVR
1. Note: In order to completely remove all CMT permissions from the DVR itself, rst
remove this DVR from all Group(s) via the Groups Tab. Refer to the Groups Tab
Section for additional information.
2. Return to the DVRs Tab and highlight the existing DVR.
3. Click on the Delete DVR button.
4. Select the Yes Button to conrm this deletion.