User guide

Dedicated Micros ©2008
17
CMT User Guide
DVR Credentials
Warning: Prior to changing credentials for a DVR, the process of adding the DVR to CMT must
be complete. This includes sending the queued transaction to the DVR. Refer to the
Add a DVR – Individually Section.
Type
Default
Login
Default
Password
General
Purpose
CMT
Web/CGI dm web
To access
conguration
web pages on
DVR
All CMT Admins will use this
id/password if prompted for an
id on the CMT Congure Tab or
when attempting to view video
via NetVu ObserVer or any
Viewer.
The Centralized Management
Tool uses this login to access
the DVR and issue CGI Com-
mands.
FTP dmftp ftp
Read/Write
FTP access
for all drives
on DVR
CMT uses this login to ‘put’ and
‘get’ les during a Firmware Up-
grade, Conguration Restore,
CMT Permission changes, and
while adding the DVR to CMT.
Telnet dm telnet
Telnet access
to all drives on
DVR
The Centralized Management
Tool uses this login for a Telnet
session with the DVR that is
required during the Firmware
Upgrade/Downgrade process.
Serial Dm serial
Serial Con-
nection ac-
cess to DVR
when direct
access is
required.
The Centralized Management
Tool does not use the Serial
Login for any particular process
othethan to store this informa-
tion in the CMT database.
Video FTP Dm ftp c:\video
The Centralized Management
Tool does not use the Video
FTP Login for any particular
process other than to store this
information in the CMT data-
base. NOTE: This login cannot
be displayed or altered via this
release of CMT.