User guide
Dedicated Micros ©2008
18
CMT User Guide
Change Credentials
1. Highlight an existing DVR.
2. Type directly over the existing Login and/or Password.
3. Click on the Save DVR button .
4. The following message will be displayed, once the save to the CMT database is
complete . .
5. In order to send the new System Login/Password to the DVR, route to the Update
DVR Tab and click on the Update DVR(s) Tab.
Important: The DVR is automatically reset by CMT during this change. Refer to the Update DVRs
Tab Section for further details
Change Web Ports
NOTE: Changing a DVR’s web port only changes how CMT communicates with the DVR, it does
not actually change the web port settings on the DVR. To enable a secondary web port on
the unit itself, the user must change this setting under the unit’s Network – Network Settings
conguration web page via the “Congure DVR” tab.
1. Highlight an existing DVR.
2. Type directly over the existing Web Port.
3. Click on the Save DVR button .
4. The following message will be displayed, once the save to the CMT database is
complete .
Unlocking a DVR
If the CMT server unexpectedly restarts while performing an operation on a DVR or a set of DVRs,
some of the DVRs could be left in a locked position and be unusable throughout CMT until it is
unlocked. In order to unlock a DVR, the user must “Poll” the unit via the DVR tab. This can be done
by navigating to the DVR tab, highlighting the DVR unit in the DVR list box and clicking the Poll DVR