User guide

CMT User Guide

Figure 16 DVR Administrator’s View of Groups Tab

Create a Group

1. Click on the New Button

2. Type in a Group Name

3. Click on the Save Button

4. Move DVRs from the Available DVR(s) Box to the Assigned DVR(s) Box via one of

the following methods:

a. Highlight one or more DVR(s) in the Available DVR(s) Box and click on the

Single Arrow Right to move all highlighted DVR(s) into the Group.

b. Click on the Double Arrow Key Right to move all DVRs into the Group

5. Assign Camera Permissions for each DVR in this Group.

a. Highlight each DVR in the DVR Camera Settings Box to view the current

Camera Settings. Note: The default is for all cameras to be ‘ON’ for both Live

and Recorded Video. This would allow viewing of both pre-recorded and live

video for any user associated with this Group.

b. To turn OFF all Camera Settings for this DVR, press the None Button for Live

Cams and/or Replay Cams.

c. To turn ON all Camera Settings for this DVR, press the All Button for Live

and/or Replay Cams.