User guide

CMT User Guide

d. To turn ON or OFF a single Camera, simply click on the check box with the

appropriate Camera Number.

Note:

The number of Camera Check Boxes that are available in CMT are dependent upon the

number of cameras that the DVR can accommodate.

e. When all camera settings are complete, press the Save Settings Button to

save the camera settings for this DVR.

f. Repeat steps 5a through 5e for each DVR in this Group until all Camera

Settings are complete.

g. The Cancel Changes Button will ensure that the camera changes made for a

particular DVR are not saved.

Note: A transaction will be queued to the Update DVR Tab when a new group is added in CMT.

Since users will need to be associated to the new group, it is best to wait until all changes

are nished prior to updating the DVR. Refer to the Users Tab and Update DVR Tab

Sections.

Delete a Group

1. Select the Group Name via the Drop Down List.

2. All the information associated with this Group will appear on the screen.

3. Click on the Delete Button.

4. When the warning message is displayed, click on YES.

5. There may be pending transactions queued in the Update DVR Tab, if DVRs were

included in this Group.

6. In order to complete the process, route to the Update DVR Tab and press the

Update DVR(s) Button. Refer to the Update DVRs Tab Section for further details.

Change an existing Group

1. Edit Group Name:

a. Select an existing Group from the dropdown list

b. The screen will be populated with all the information for this Group

c. Change the name by typing directly over the existing Group Name combo box,

and click on the Save button.

d. There is no transaction queued for this type of change to the Update DVR Tab.

2. Edit Group DVRs:

a. Select an existing Group from the dropdown list,

b. Move DVRs from Available to Assigned via the Arrow Keys.