User guide

CMT User Guide

c. This type of change is automatically saved and does not require an actual

save by the Administrator.

d. A transaction will be queued to the Update DVRs Tab and therefore sending

this transaction to the DVR to complete the process is required. Refer to the

Update DVR Tab for additional information.

3. Edit a Group’s Viewing Permissions:

a. Select an existing Group from the dropdown list

b. Highlight a DVR in the DVR Camera Settings Section

c. Check/uncheck Cameras to allow or disallow Viewing Permissions

d. Click on the Save Settings Button.

e. A transaction will be queued to the Update DVRs Tab and therefore sending

this transaction to the DVR to complete the process is required. Refer to the

Update DVR Tab for additional information.

Remote Set/Unset/Override

The remote set/unset/override webpage of the DVR unit is implemented in CMT such that Groups of

DVRs can be remotely forced to change their record and alarm settings to operate in Day, Night, or

Weekend Modes for a dened period of time.

Important: This is not a supported feature for the SD series therefore this will not force any SD

DVRs in the group to a particular schedule override.

1. Select an existing Group from the dropdown list.

2. Select an override duration time in minutes (the time that the unit will operate at the

forced operating mode).

3. Press the Force DAY Mode button to force the DVRs in the selected group to

change the record and alarm settings to operate in DAY mode for the override

duration period.

-OR-

Press the Force NIGHT Mode button to force the DVRs in the selected group to

change the record and alarm settings to operate in NIGHT mode for the override

duration period.

-OR-

Press the Force WEEKEND Mode button to force the DVRs in the selected group

to change the record and alarm settings to operate in WEEKEND mode for the

override duration period.

4. When the process completes the “Group Updated” message is displayed.

Figure 17 Group Tab - emote Set/Unset/Override