User guide

CMT User Guide

Create a DVR Administrator

DVR Administrators have access to the Tabs, Users, DVRs, and Groups that are granted to them

by the CMT Administrator. DVR Administrators cannot create an Administrator with a higher level of

authority than their own.

Figure 18 Users Tab - Create CMT Administrator

1. Click on the New Button

2. Complete all of the following information:

a. First Name and Last Name (required elds)

b. Phone and Extension (optional elds)

c. Alternate Phone and Extension (optional elds)

d. Login and Password to access CMT (required elds). Reference Addendum #A

for allowable characters in the Login and Password elds

e. Email Address (optional eld)

f. Notes (optional eld)

g. DVR Group Section – A Group must be selected for the DVR Administrator.

This Group should contain all the DVRs that this Administrator will manage.

It is up to the DVR Administrator to create Sub-Groups from this original

Group for their Viewing Users. Refer to the Groups Tab Section for additional

information.

h. CMT Permissions Section – Check only the CMT Permissions that this DVR

Administrator should be allowed to access. Each Check Box represents a Tab

in CMT consequently if the check box is selected this DVR Administrator will be

able to access the corresponding CMT Tab.

Note:

Access to the Update DVR Tab is automatically granted to all DVR Administrators that have

permissions to the Users or Groups Tabs. The DVRs Tab CMT Permission is only allowable

to CMT Administrators.

3. Click on the Save Button