User guide

Dedicated Micros ©2008
36
CMT User Guide
4. When all Congure changes are complete, it is a good practice to route to the
Copy/Restore Tab and create a Back-Up of the DVR’s Conguration in the CMT
Database. Refer to the Copy/Restore Tab Section for more information.
Important:
If prompted for a login while in the Congure DVR Tab, the CMT Administrators will use
the Web Login/Password that is located on the DVRs Tab. DVR Administrators will use
the CMT Login/Password they use to access CMT.
• The following areas are not accessible in this CMT Release via the Congure Tab
due to the ActiveX Browser Settings:
• Camera and Record Setup – Thumbnail Images
• VMD – Walk Test Feature
• Live Web Page
• Demo Web Page
• If it is necessary to access the above listed options, change the Browser
Settings to JAVA Applet and press the Save Button on the Main Set-Up Page
of the Congure DVR Tab. CMT automatically resets the Browser Settings to
Plugin/ActiveX for each session which allows Camera Title changes on the
Congure DVR Tab. Refer to the Trouble Shooting Section at the end of the
Guide for further information.
Warning:
The User Accounts Conguration Web Page has been blocked from the Conguration
Tab as this feature will conict with CMT. This feature should not be used.
• Only CMT Administrators have access to the Conguration Web Pages outside
of CMT, via the Web Login and Password located on the DVRs Tab. It is
recommended that all Conguration Web Page changes be made within CMT via
the Congure DVR Tab.