User guide

CMT User Guide

7. The DVR will be locked (indicated by the red icon ) until this process is

complete. The Lock icon will be visible on all Tabs where this DVR is displayed.

8. When the Lock is lifted from the DVR, the Restore Process is complete and this

DVR will have the new Conguration.

Copy to Other DVR(s)

This option allows a single Conguration to be propagated to one or many DVRs.

Important:

In the current CMT release, Congurations can only be copied to ‘like’ model DVRs with

identical Firmware Versions. Consequently a Conguration cannot be copied from a

BX2 to a New DS2 nor can the Conguration of a New DS2 V4.3 (005) be copied to a

New DS2 V4.3 (001).

1. Select a DVR by highlighting it on the left side of the screen

2. Click on the Conguration that will be used (any automatic or manually created

Restore Point).

3. Click on the Copy to Other DVR(s) Button

4. Click on each individual check box or the Select All Button to identify the DVRs that

will receive this Conguration

5. Click on the Push Conguration Button to begin the process

6. Click on the Commit Button

7. A Progress Bar will appear at the bottom of the screen.

8. All DVRs selected in the Push Conguration Section above will be locked in CMT

until the process is complete.