User guide

Dedicated Micros ©2008
60
CMT User Guide
Appendix B – CMT CSV FILE CREATION
Creating a Batch DVR Import CSV File
Accepted CSV Column Headers:
The following column headers are recognized by the CSV Import function on the DVRs tab. They
must be named the following way to be correctly interpreted by the importer, but they are case
insensitive and can be in any order:
• “DVR NAME” – The name by which the DVR will be called inside CMT.
• “DVR ADDRESS” – The IP Address or Fully Qualied Domain Name of the DVR.
• “WEB PORT” – The port number for Http communication (default is port 80).
• “CGI USERNAME” – A username for accessing cgi variables/video
• “CGI PASSWORD” – The password that goes with the “CGI USERNAME”
• “TELNET USERNAME” – The username for establishing a telnet connection with
the unit. The unit cannot be added without a valid Telnet username.
• “TELNET PASSWORD” – The Telnet Username’s corresponding password.
• “FTP USERNAME” – The username for establishing an FTP connection with the
unit. This user must be an admin level FTP user with access to at least the Web
and Video drives.
• “FTP PASSWORD” – The FTP Username’s corresponding password
• “SERIAL USERNAME” – Serial username, not required for adding the unit, but this
will override any Serial connection credentials, which protect the unit from Serial
cable interaction, leave blank for no protection.
• “SERIAL PASSWORD” – Password for the serial user.
Below is an example:
For more information on creating a CSV DVR unit le, see the example le that came with CMT.
Creating a Batch User Import CSV File
Accepted CSV Column Headers: