User guide

Dedicated Micros ©2008
8
CMT User Guide
Tab Display
The Tabs displayed will be tied to the level of permissions that are assigned to this Administrator. In
the case above, this CMT Administrator has all permissions and therefore has access to all available
Tabs in CMT.
DVRs Tab
This Tab is only available to CMT Administrators. DVR Administrators cannot access the DVRs Tab.
The DVRs Tab allows DVRs to be added, deleted, or edited in CMT.
Important:
In order to complete the process of adding a DVR or changing the system ids/
passwords, the CMT Administrator will be required to route to the Update DVRs Tab
and send the pending transaction to the DVR.
In order to perform an action on a DVR, it must rst be added to CMT. Once a DVR is added to CMT,
it will appear on all applicable Tabs and can be accessed by all permissible Administrators. All DVRs
are added to CMT via the DVRs Tab.
CMT is compatible with the following Dedicated Micros’ DVRs:
1. NetVu DS2
2. NetVu BX2
3. ChipWrights DV-IP
4. DV-IP ATM
Important:
All DVRs must have embedded Firmware V4.3 or higher in order to be added to CMT.
Figure 2 DVRs Tab Introduction