User guide

CMT User Guide

Add a DVR

A DVR can be identied by either the IP Address or the Fully Qualied Domain Name (FQDN) in

CMT. Each DVR is independently dened consequently a DS2 for example could be identied by its

IP and another DS2 could be identied by its FQDN.

In order to ensure that CMT will recognize the DVR, it is always a good practice to attempt a ‘ping’

prior to dening the DVR. Using a DOS prompt, enter the ping command followed by either the IP

or FQDN. If a reply is returned than the ping was successful. Contact your IT Department for further

information.

Figure 3 PING Command

A DVR can be added one of two ways:

1. Add a DVR individually by using the New DVR button

2. Add a batch of DVRs by using CSV Import

Figure 4 DVRs Tab – Add a DVR

1. Click on the DVRs Tab