Thank you for choosing the CMTECK® Microphone. For best results, please take a few moments to read this manual and familiarize yourself with proper operation ahd care of this microphone. The microphone from CMTECK® is a compact microphone designed to prov de you with outstanding sound for communicating and recording.
i About the working status: The LED indicator refers working status, whet you firstly plug in the mitotic your device, the LED light will show green, Green Light: The mic has been connected to your device successfully, 1 Flashing Green Light: The microphone is working and the Green Light will flash constantly. i Red Light: When you click the Mute Button to mute your microphone, the LED light will show red.
i Ber ree oe del a sg 1.Plug the microphone into your USB port.of your computer using the provided USE cable. 2. To select the MIXTEC Microphone as the default audio input device. Method 1; G6 to the Start Mendicant select Control Panel, Double click the Sound icon.
3. Select the Recording tab; highlight the microphone icon labeled CHECKMATE and click Set Default. Sound Playback Recording sounds Communications Celesta according deice below moi 8 sting Kieth Configure 4. To make further adjustments to the recording settings, double-click on the microphone icon labeled CHECKMATE. From the drop-down meh you ¢an changing the volume for audio recording.
MW To get better sound quality Set both the on-board control of the mic and outputting level of computer at {When using Windows computer, if there's "Microphone Boost", turn Ete 0.) High volume setting is always the culprit for poor sounding quality. .
IE ea 1. Make certain ‘that any audio applications are closed. 2: Plug the microphone into your USB port of your computer using the provided USB cable, 3. To set the USB microphone haste default audio input for audio, click on the Apple icon in the upper left hand of the screen and select System Preferences as shown the figure below, 4, Next, click on the Sound icon in the Hardware group as shown in the figure Bia Noe © 7 Lars.
5. After opening the Sound dialog screen, there will be three tabs at the top of the window, select the Input tab by clicking on it. 6. Then select'the CHECK USB as the device for sound input as shown, no hi Bon En Sound Effects | Cutout Select & device for sound input. Man Bi Altamira Morphine Milan, tie Settings for the selected device: Snout volume: i ino levels Cutout voluble: 8 Mite 1 Show volume in men bar 7.
EE BW Ql: No Sound from Microphone BH Al: Please check USB connection, gain skibob setting, mix knob setting and headphone level. MW Q2: Why the sound wan't playback from the computer? HW AZ: Please check you have set up your computer according to the "Getting Started’ section in this manual. Make sure that ‘CHECKMATE Microphone’ setup to be the default audio output. If your audio program was open before plugging in the microphone, you may need to close and re-open the program.
[EEE CHECKMATE microphones are guaranteed against defects in materials and workmanship for one year from the date of purchase. if you encounter any problem with this unit, promptly contact the company friar which yoy purchased it for assistance. The original dated sales receipt will be necessary foray warranty claim. Do not send any unit directly to us without prior authorization firm our service department.