Worry-free 12+3 Months Warranty We offer worry-free 15 months warranty and lifetime technical support. Your satisfaction is always our primary concern. We sincerely hope that you would be satisfied with our product and service, If you have anv concerns, please don't hesitate and contact us for slut ion and we will do our best to help you.
Thank you for choosing the CMTECK® Microphone. For best results, please take a few moments to read this manual and familiarize yourself with proper operation and care of this microphone. The microphone from CHECKMATE Is a compact microphone designed to provide you with outstanding sound for communicating and recording. It sits flat on a surface such as a table or a desk and utilizes the reflections from the surface to capture sound.
Features: : LIB connector, no batteries required : Multipurpose condenser microphone . Compatible with Windows and Mac degree coverage for great sound over a wide range : Plug and Play | does not regime additional software to operate.
For Windows (Take windows 7 for example} 1.Plug the microphone into your USB port of your computer using the provided USB cable. 2.70 select the CHECKMATE Microphone as the default audio input device, Method 1: Go fo the Start Menu and select Control Panel Double click the Sound icon.
3. Select the Recording tab, highlight the microphone icon labeled CHECKMATE and click Set Default. (Resorting || sends Select a recording device below to modify is settings Anemic = wi . Antinuclear Set Detain make further adjustments to the recording settings, double-click on the microphone icon labeled CHECKMATE, Eros the drop-down menu you can change the volume for audio recording.
To get better sound quality Set bath the on-board control of the mic and input/output level of computer al (When using Windows computer, if there's "Microphone Boost), turn ito 0.) High volume setting is always the culprit for poor sound quality.
For Apple-Macintosh OSX (10.4.11 or higher) 1. Make certain that any audio applications are closed. 2, Plug the microphone into your USB port of your computer using the provided USB cable. 3. To set the USB microphone as the default audio input for audio, click on the Apple icon In the upper left hand of the screen and select System Preferences as shown the fissure below. 4.
5. After opening the Sound dialog screen, thees will be three tabs at the top of the window, select the input tab by clicking on it. 6, Then select the USB Audio Codex as the device for sound input as shown in Bound Effects Loopy Select a device for sound Input. Settings Bue the se taped device input alumna: @ : pat less Output volume Hw we TH Show ointment in mem oar 7.
Question and Answer Ql: No Sound from Microphone Al: Please check USB connection, gain knob setting, mix hob setting and headphone level, QZ: Why the sound won't playback from the computer? AZ: Please check you have set up your computer according to the ‘Getting Started section in this manual. Make sure that CHECKMATE Microphone’ setup to be the default audio output. If your audio program was open before plugging in the microphone, you may need to close and re-open the program. 3.
G7: The miss not recognized by my pe and mac, any suggestions? AZ: 1.Restart computer and try other USB port, 2.Check if the “USB PnP Audio Device” appears in the sound settings of computer, then the mic is able to work If not please email us. We will provide other solution to help. G8: Dolefulness hook up external speakers to be able to hear other callers questions/comments? Or can | hear them through this device? AS: You will need external speakers. Thomistic only.
Warranty MIXTEC microphones are guaranteed against defects in materials and workmanship for one year from the date of purchase. If vou encounter any problem with this unit, promptly contact the company from which you purchased if for assistance. The original dated sales receipt will be necessary for any warranty claim. Do not send any unit directly to us without prior authorization farm our service department.