User manual

CD-Player
Version 1 cmx® CRC 7270 Side 11 from 17
indicate that the set is now in “memory programming mode”,
at the first memory position.
Press the “NEXT/BACK” keys to select the track (song)
number you wish to be stored in the first memory (program)
position and press the “REPEAT/PROGRAM” key to confirm
your selection.
When you press “REPEAT/PROGRAM” key the display will
advance to the next memory position number.
Repeat the previous 2 Steps, each time selecting any track
number of your choice to be stored in the successive
memory (program) positions.
After each track number, remember to press the
“REPEAT/PROGRAM” key.
After a maximum of songs (Audio-CD – 20 songs, MP3-CD
– 99 songs) (or less) have been selected as described
above, press the “PLAY/PAUSE” key.
Also, the “program/repeat” symbol “P” will remain “on” to
indicate that you have saved a program-memory
(sequence).
Pressing “PLAY/PAUSE” key will now play back the “saved
sequence” in the program memory.
Pressing “NEXT/BACK” will move to the next or previous
song in the saved sequence.
To clear (cancel) the entire program which is stored in the
memory, simply press “STOP” key twice, or switch off the
set.