User manual

Cassette tape
Version 1 cmx® CRC 7270 Side 13 from 17
7. Cassette tape
7.1. Cassette tape playback
Slide the function switch to the “TAPE (OFF)” position.
Open the cassette door by pressing the “STOP/EJECT” key.
Insert a pre-recorded cassette with the tape-side up, into the
proper guide-rails on the inside of the cassette door.
Gently push the cassette door forward to close it. Make sure
the tape is fully and properly inserted before doing so.
Press the cassette-“PLAY” key. This will start the playback.
NOTE
The Tape moves from right to left.
Adjust the volume to the desired level.
The tape playback can be stopped at anytime, by pressing
the cassette-“STOP” key. At the tape’s end, the set switches
itself off automatically, and release the play button at the
same time.
Press the cassette-“STOP” key followed by the cassette-
“REWIND” or cassette-“FAST-FORWARD” key to rewind or
forward the tape at high speed.
7.2. Cassette tape recording
Open the cassette door by pressing the cassette-
“STOP/EJECT” key.
Insert a blank cassette with the tape-side up, into the proper
guide-rails on the inside of the cassette door.