User manual

Cassette tape
Version 1 cmx® CRC 7270 Side 14 from 17
Gently push the cassette door forward to close it. Make sure
that the tape is fully and properly inserted before doing so.
The set is now ready to start recording, which can be done
from either the radio or CD player.
7.2.1. Recording from radio to tape
Slide the function switch to “RADIO” position.
Tune in the desired station by turning the “tuning knob”. If
necessary, extend the telescopic antenna and adjust
position of the set to improve reception.
Press the cassette-“PLAY/RECORD” keys.
Due to the “ALC function” (automatic level control), no
further adjustment are required. The volume control will not
affect the recording.
7.2.2. Recording from CD/MP3-CD/ USB
Slide the function switch to “CD/MP3” position.
Start to playback with the desired source (either Audio-CD
MP3-CD or USB) and select the exact song to be recorded.
Press the cassette-“PLAY/RECORD” keys to start the
recording.
Simply press the cassette-“STOP” key to stop recording.
7.2.3. Preservation of recordings
To prevent accidental erasing of a cassette, simply break off
the two plastic tabs located on the cassette tape’s rear
edge.