User manual

CD-Player
Version 1 cmx® CRC 7270 Side 8 from 17
5. CD-Player
5.1. Insert and removal of discs
When opening the CD-door, always ensure the discs is not
in motion (not spinning) when you open the CD-door.
Always press the “STOP” key to stop the disc spinning first.
Place a CD into the compartment with the label-side (printed
side of disc) facing upwards. Press down in the center part
of disc until the disc “locks” onto the center spindle.
When the CD has been placed onto the center spindle,
gently lower the CD-door downwards until it locks shut.
The CD is now ready to be played.
To remove a disc, follow the same procedure as described
above, except to remove the CD instead of inserting it into
the compartment, by placing one finger at the middle of disc
(center spindle) and the other at the edge of the disc and
gentle pulling upwards.
5.2. CD- and MP3-CD operation
Insert a CD as described. Set the function switch to
“CD/MP3”.
Once the CD door is closed (with a disc inside) the set will
immediately read the disc and the display shows the number
from the song (tracks).
The disc will automatically start spinning and the first song
(track) will start playing. The display will indicate the current
track number (“001” if it is the first track).
At anytime during playback, press CD “PLAY/PAUSE” to
stop the operation of the unit. Press “PLAY/PAUSE” to
resume the operation at the same track and position.