Operation Manual

Preparation

- 9 -

4. Preparation

4.1. Connections

Follow these steps to connect the system:

1. Clamp the white wires to the red terminals at the rear.

Clamp the black wires to the black terminals; see

drawing:

2. Connect the mains power cable first to the system and

then to a wall outlet.

The system is in standby mode and the status indicator

lights up red.

Disconnect the system from mains power suppy during

extended periods of non-use; it consumes a certain

amount of power in standby mode.

L R

Step 1

Step 2