Operation Manual

Preparation
- 10 -
Only use a power adapter with input 230 Volt/50 HZ and
output 12V 2.25A.
Further information regarding connections see in chapter
9.
4.2. Insert battery
The battery compartment is at the top of the remote control
1. Insert two AA batteries (1.5V LR6) observing the polarity
(+ and -) as marked inside the battery compartment.
Notes: Batteries not included - 2 pieces AA (1,5V LR6) for
remote control necessary!
The lifetime of the battery is approximately 6 months with
normal use.
To avoid damage remove the battery from the remote-
control during extended periods of non-use.
4.3. Set current time
1. Turn the system off.
2. Press PROGRAM / PLAY-MODE.