Operation Manual

General
- 1 -
1. General
1.1. Safety precautions
Only connect to mains power supply (230 Volt/50 Hz).
Do not place containers filled with water on top of the
device.
Do not place the device in close proximity of water (e.g.
sink, wash basin, etc.). The device can fall into the water
and cause a short circuit.
The device consumes some power during standby
operation. For zero power consumption disconnect from
mains power supply.
Place the device on a stable surface to prevent it from
tipping over and causing damages or injuries.
Condensation can form if the device is placed in cold
surroundings. Leave the device for at least one hour in
standby mode.
Keep at least 10 cm distances at top and rear and 5cm at
the sides for proper ventilation to avoid overheating.
Do not subject the device to direct sunlight or high
temperatures; this can result in fire.