Operation Manual

Radio
Version 1 cmx® DMS 7640 Seite 22 von 31
8. Radio
Press the “ON/OFF” key once to switch on the unit, than press the
“TUNER/BAND” key to select the desired radio band.
MW (AM) stations: rotate or reposition the set to improve
radio reception.
FM stations: extend and adjust the FM-wire antenna to
obtain the best reception.
8.1. Radio memory
At any time, the currently displayed station or frequency can be
stored into one of the memory position.
Press “PROGRAM/REPEAT” key.
Press “MEM+/FOLDER+” or “MEM-/FOLDER-“ key to select
desired memory position (there are 10 memory positions for
AM band and 10 memory positions for FM band).
Press “PROGRAM/REPEAT” key once to save the selected
station into selected memory position.
To recall any saved memory, simply press
“MEM+/FOLDER+” or “MEM-/FOLDER-“ – the saved radio-
band will be recalled.
To clear the memory of any position, simply save a new
station to the same memory position.
To listen to the saved program, give in the number on the
remote control.