Operation Manual

Digital clock function
Version 1 cmx® DMS 7640 Seite 24 von 31
9. Digital clock function
The set has a built-in digital clock, which is displayed when the unit
is in “standby mode” or when you press & hold
“PROGRAM/REPEAT” key for two seconds during CD or radio
operation. To set the correct time, follow the procedure:
Switch unit to “standby mode”
(Display light = off)

Press & hold “PROGRAM/REPEAT” key for 3 seconds
Display flash shows 12 or 24 hours flashing

Press “NEXT” or “BACK” key to select 12-hour or 24-hour clock
display system & press “PROGRAM/REPEAT” to confirm you
selection

Press “NEXT” or “BACK” key repeatedly to set the correct hour in
the display and press “PROGRAM/REPEAT” key to confirm.

Press “NEXT” or “BACK” key repeatedly to set the correct minute in
the display and press “PROGRAM/REPEAT” key to confirm.

Correct time is now set and will be shown in the display!