Operation Manual

Wake-up function
Version 1 cmx® DMS 7640 Seite 25 von 31
10. Wake-up function
This set has a timer function to enable you to program the unit to
automatically switch “on” or “off” at preset times. The timer is set up
when all steps are finished:
1. Press and hold the “TIMER” key. The “on” symbol and the
time 00:00 (flashing) appears in the display.
2. Press “NEXT” or “BACK” key to adjust the hour of the
desired “power on” time and then press “TIMER” key to
confirm.
3. Press “NEXT” or “BACK” key to adjust the minutes of the
desired “power on” time and then press “TIMER” key to
confirm.
4. Now the symbol in the display changes to show “off” symbol.
5. Press “NEXT” or “BACK” key to adjust the hour of the
desired “power off” time and then press “TIMER” key to
confirm.
6. Press “NEXT” or “BACK” key to adjust the minutes of the
desired “power off” time and then press “TIMER” key to
confirm.
7. Now the display will indicate the “wake up mode” (CD or
radio). Press “NEXT” key to choose the desired mode &
press “TIMER” key to confirm.
8. The display then shows the “wake-up volume”. Press
“NEXT” or “BACK” key to decrease or increase the volume
level to be used for the music to be played when the timer
switches on the unit at the pre-set time.
9. Press “TIMER” key to confirm. The unit will then
automatically display all your settings in sequence (Power
ON time, Power OFF time, Power ON mode, Power ON
Volume Level).