User manual

CD player
Version 1 cmx® DMS 7640 Seite 17 von 31
7. CD player
Press the “FUNCTION” key repeatedly until the display show “CD”.
7.1. Insert and removal of discs
Press “OPEN/CLOSE” key and place a CD (CD or MP3 CD)
onto the center spindle with the label side (printed side of
disc) facing upwards. Than press “OPEN/CLOSE” key to
close the CD door.
The CD display will momentarily show the total number of
tracks on the disc and the total playback time of the disc.
To remove a disc, press “OPEN/CLOSE” key. The door will
open and allowing the removal of the CD inside.
IMPORTANT
Always hold a CD by it’s edges. Avoid getting any finger-prints,
smudges or dirt onto the surface of a disc. In case this happens,
use a special CD-cleaning cloth or cleaning kit to remove the
dirt or smudges.
7.2. CD and MP3-CD operation
Insert a CD or MP3-CD as described.
Once the CD door is closed (with a disc inside) the set will
immediately read the disc and the display shows the number
from the song (tracks).
Press the “PLAY” key and the disk will start spinning and
than playing the first song (track).
At anytime during playback, press “PLAY” key to stop the
operation of the unit. Press “PLAY” again to resume the
operation at the same track and position.