VER1120087680 DESIGN MINI SYSTEM DMS 7680 USER MANUAL -0-
General Imprint All rights reserved. Any reproduction without consent of cmx® is prohibited. cmx® reserves the right to modifications of the device.
General CONTEXTS 1. GENERAL ...................................................................................... - 1 1.1. Safety Precautions ...............................................................- 1 1.2. Disposal of Waste Electronic Equipment .............................- 2 1.3. Battery Disposal ...................................................................- 2 1.4. Copyright ..............................................................................- 2 1.5. Hearing Protection ..........
General 9.1. Connect Earphones ............................................................- 19 9.2. USB 2.0 ..............................................................................- 19 9.3. SD and MMC memory card reader ....................................- 20 9.4. AUX ....................................................................................- 20 9.4.1. AUX input on front panel ..............................................- 21 9.4.2. AUX input on rear panel ...............................
1. General 1.1. Safety Precautions Only connect to mains power supply (230 Volt/50 Hz). Do not place containers filled with water on top of the device. Do not place the device in close proximity of water (e.g. sink, wash basin, etc.). The device can fall into the water and cause a short circuit. The device consumes some power during standby operation. For zero power consumption disconnect from mains power supply.
General 1.2. Disposal of Waste Electronic Equipment Your product is manufactured from high quality raw materials and should be recycled. Ask your municipality for collecting points for waste electronic equipment. Do not dispose of old appliances with the household waste. The symbol on the product, the instructions for use or the packing will advert about the methods for disposal. 1.3. Battery Disposal The law requires returning exhausted batteries to public collection points or the dealer.
General Only turn the volume to a level where you can still hear ambient noise. 1.6. Cleaning and Maintenance Cleaning the Casing Clean the casing with a dry cloth. Before cleaning disconnect from mains power supply. Do not clean with liquid cleaning agents or a wet cloth; this can cause a short circuit. Cleaning CDs Clean CDs with a soft cloth from the center to the edge. Do not use solvents or abrasive cleaning agents. Do not use pointed or sharp utensils for cleaning; this will damage the CD.
Features 2. Features This HiFi system – DMS 7680 can play all Audio CDs and MP3 CDs. Music playback is also possible via USB port and SD card reader. You can play MP3 files by connecting your portable MP3 player to one of the two AUX inputs. Purchase the AUX cable separately.
Location of Controls 3. Location of Controls 3.1. Main Unit - Front 1 13 12 11 10 9 8 7 6 54 3 2 1 MP3 tray / AUX input Port for MP3 player / USB stick 2 OPEN/CLOSE Open and close CD drive 3 XII / ST.
Location of Controls 3.2.
Location of Controls 3.3.
Location of Controls 15 STOP/BAND CD: Stop playback RADIO: Toggle between AM/FM 16 XII / ST.
Preparation 4. Preparation 4.1. Connections Follow these steps to connect the system: Step 1 L R L R Step 2 1. Connect the speaker cables to the speaker jacks. 2. Connect the mains power cable first to the system and then to a wall outlet. The system is in standby mode and the status indicator lights up red. Disconnect the system from mains power supply during extended periods of non-use; it consumes a certain amount of power in standby mode.
Preparation 4.2. Insert Battery The battery compartment is at the rear of the remote control. 1. The CR2025 button cell is already inserted in the remote control before delivery. 2. Remove the plastic strip to activate the battery. To change the button cell insert the battery observing the polarity (+ and -), as marked inside the battery compartment. The lifetime of the battery is approximately 6 months with normal use.
Preparation 7. The current time is now set. The settings are deleted if you disconnect the system from mains power supply and in case of power failure.
CD player 5. CD player 5.1. Insert CD / MP3 CD 1. Press the OPEN/CLOSE button to vertically open the CD drive. 2. Insert a CD with the label up and carefully press it down onto the ball bearing spindle. 3. Press the OPEN/CLOSE button to close the CD drive. Do not close the CD drive manually; this can cause damage to the mechanism. 5.2. CD / MP3 CD Playback This system can play CDs / MP3 CDs in different playback modes. 1. Press the PLAY/MODE button on the remote control to select the desired mode.
CD player 5.3. Program CD/ MP3 Tracks You can program your own playlist with up to 20 tracks. 1. During CD / MP3 CD playback press the STOP button before programming. 2. Press the PROGRAM CLOCK ADJ button on the remote control or CLOCK ADJ. MEMORY on the system until 00 P—01 is displayed. 3. Press or on the remote control until the desired track is displayed. 4. Press the PROGRAM CLOCK ADJ button on the remote control or CLOCK ADJ. MEMORY on the system. 5.
Radio 6. Radio 6.1. Save radio stations You can save the current station or the frequency to one of the station memories. You can save up to 20 stations to the memory. 1. Press the MEM-UP/FOLDER UP button until “01” is displayed. 2. Press or on the remote control until the desired frequency is displayed. 3. Press the PROGRAM CLOCK ADJ button on the remote control or CLOCK ADJ. MEMORY on the system. The radio station was successfully saved to the station memory! 4.
Sound Scenarios 7. Sound Scenarios 7.1. Bass You can boost the bass for a more dynamic sound. 1. Press the BASS button on the remote control. “BASS” is displayed. 7.2. Effect Repeatedly press the EQ button to select the desired sound scenario. Select between the following sound scenarios: Flat Pop Rock Jazz Classic In FLAT mode the equalizer is deactivated.
Further Functions 8. Further Functions 8.1. Timer Wake up with music at a preset time. The system turns on in the previously selected mode (CD, RADIO, USB, SD or AUX-IN). Example: If you listened to music from your MP3 player this mode will be selected for the timer. If you previously listened to music from your USB stick, please leave it connected to the system for the timer to turn it on! Ensure that the current time is properly set. Select the music mode (CD, RADIO, USB, SD or AUX).
Further Functions 4. Press the PROGRAM CLOCK ADJ button on the remote control or CLOCK ADJ. MEMORY on the system. 5. Press or on the remote control to set the Minute. 6. Press the PROGRAM CLOCK ADJ button on the remote control or CLOCK ADJ. MEMORY on the system. 7. The display shows “DISABLE“; press to activate the timer. 8. The display shows “ENABLE“. The settings are deleted if you disconnect the system from mains power supply and in case of power failure. 8.2.
Further Functions 8.3. ID3 Tags for MP3 Tracks The display can show text information. 1. Press the ID3 DISPLAY button. 2. The display shows ID3 ON. 8.3.1. Further Operation Procedure Operation Deactivate ID3 tags Press the ID3 DISPLAY button. ID3 OFF is displayed.
External Components 9. External Components 9.1. Connect Earphones 1. Connect your earphones or headphones. The speakers are muted if earphones are connected. To avoid hearing problems do not use earphones or headphones for an extended period of time. Increased sound pressure from earphones or headphones can cause hearing loss. See chapter 10 for further settings. 9.2. USB 2.0 Extend your system by connecting your MP3 player or USB stick. Do not disconnect the device when “USB” mode is selected. 1.
External Components To avoid damage only disconnect the device after pressing the STOP button and selecting a different mode with the FUNCTION button. 9.3. SD and MMC memory card reader Extend your system by inserting an SD or MMC memory card in the card reader. Do not disconnect the device when “SD” mode is selected. 1. Insert the SD or MMC card in the card reader. 2. Press the FUNCTION button until “SD” is displayed. 3. Press the PLAY button to start playback.
External Components 9.4.1. AUX input on front panel There is an AUX input on the front panel to connect your MP3 player or USB stick to the 3.5mm jack. 3.5 mm jack 1. Connect your MP3 player to the 3.5mm jack. 2. Adjust the volume on the system. 3. Please use the supplied 5 cm AUX cable if your MP3 player fits to the jack but you cannot close the compartment. 4. Connect the 5cm AUX cable to the jack. Connect the other side of the cable to your MP3 player.
External Components 9.4.2. AUX input on rear panel You can use the AUX input at the rear in case your MP3 player is too big for front connection. Do not disconnect the device when “AUX” mode is selected. 1. Turn on your MP3 player and select your favorite song. 2. Press the FUNCTION button until “AUX” is displayed. 3. Press the PLAY button to start playback. To avoid damage only disconnect the device after pressing the STOP button and selecting a different mode with the FUNCTION button.
Further Operation 10. Further Operation This operation you have for CD playback and for external components (SD / MMC / USB). Procedure Operation Stop playback Press the STOP button. Pause Press the PLAY/PAUSE button. Press again to resume playback. Skip mode Press or during playback or pause modes. Skip to next folder Press the FOLDER button. Skip 10 tracks ahead Skip 10 tracks back Press the Track+10 button. Press the Track-10 button.
Troubleshooting 11. Troubleshooting Contact the service hotline or use the contact form on the homepage in case of problems with the system that are not dealt with here. Malfunction Solution “No disc” Insert a CD. Insert a finalized CD-RW or CD-R. Insert the CD with the label up. Try another CD or clean the CD. Increase the distance to TV set or Bad reception DVD player. Point the antenna in a different direction.
Troubleshooting connected. Remote control Increase the volume. Disconnect the earphones. Deactivate MUTE mode. Decrease the distance to the system. does not work. Exchange the battery. Point the remote control towards the system’s IR sensor. No CD playback. Check your CD for damages or scratches. USB stick / SD memory card does Insert the CD with the label up. Use a different USB stick or SD card to check the function.
Warranty 12. Warranty This system comes with a 24-month warranty from the date of purchase. Please keep your purchase documents! In case of manufacturing or material defects the warranty consists of rectification of defects or exchange. The warranty does not include damages or malfunctions due to improper use wear and tear repairs by third parties The warranty does not include display damage firmware update accidental damage. Repair does not extend the warranty period. 12.1.
Warranty Service hotline o Austria: +43 0720 502671 – please dial with the zero! o Germany: +49 (0)180 166 66 264 621 o Switzerland: +41 (0) 848 00 3322 Contact form – www.cmx-electronics.com 12.2. Warranty has expired Please contact us by phone or contact form in case your warranty has expired. We will help you! Please inform us about the following: Unit type Purchase date Malfunction 12.3.
Warranty Attach filled-out warranty card Error description Example for error description Wrong Correct Unit is defective Unit does not respond Unit malfunctions Unit cannot be switched on Sender information: Name, address, ZIP code, city and phone number and e-mail address - 28 -
In the box 13. In the box Please contact your dealer directly in case one of the accessories is missing or damaged.
Technical specifications 14. Technical specifications CD Player Formats Audio CD / Audio CD-R / Audio CD-RW MP3 CD / MP3 CD-R / MP3 CD-RW Frequency range 100 Hz ~ 16 kHz S/N ratio 50 dB Radio Frequency bands Frequencies AM / FM & FM Stereo AM 522 – 1620 kHz FM 87.5 – 108 MHz Connectors Inputs 2 x AUX USB 2.0 Outputs 3,5 mm headphone Speakers (left / right) Card reader SD cards MMC cards Speakers Power output max.
Technical specifications Dimensions 122 x 202 x 93 mm General Power consumption 15 Watts Mains power AC 230 V ~ 50 Hz Dimensions 408 x 202 x 96 mm - 31 -
www.cmx-electronics.
