Operation Manual

Start of operation and configuration
- 17 -
5.3.1.2. Radio channel list
For editing the radio channel list same above functions as described for
TV channels, are available.
5.3.1.3. Delete all
Enter your valid password and confirm the security prompt to delete all
saved TV and radio channels.
Reset to default to restore the factory channel list.
5.3.2.
Installation
5.3.2.1. Antenna connector
Select your antenna type.
5.3.2.2. Satellite list
Display all saved satellites.
1. Press OK to activate/deactivate the desired satellite.
A check mark is displayed.
Changing
Press shortcut key RED to edit the satellite name and the position.
This setting is important for rotating motor antenna.
New
Press shortcut key GREEN to manually add a satellite.
Delete
Press shortcut key BLUE to delete a saved satellite and its channels.
5.3.2.3. Antenna setting
Set the connected satellite antenna.
Fixed orientation
Satellite List of active satellites from the satellite list.
LNB-Frequency Set LNB frequency.
Default setting is “universal“.