Operation Manual

Start of operation and configuration
- 18 -
Transponder List of programmed transponders
DiSEqC 1.0 Set to multi satellite reception
22K Automatically setting
Polarization Set polarization
Motor Antenna
LNB type Set LNB type
Motor type Set motor type
Local. Longitude Only motor type - USALS
Delete all Delete satellite positions
Not possible for motor type
Motor settings Access DiSEqC 1.2 control centre
Limitation Select turning radius
Single satellite search
Search activated satellite in this submenu for channels.
Satellite Select satellite
Only for FTA Yes: search free-to-air channels
No: search all channels
Channel search Search TV channels, radio channels or both
Network search Only available in search mode “scan preset”
Search mode Auto scan, scan preset, only created
Transponders are scanned
Search Press OK to start scanning. Channels are added
to general satellite list.
Multi satellite search
For complete satellite scan you have the same functions as for above
single satellite search.
TP List
Edit the transponders of active satellites in this submenu.
Changing Press shortcut key RED to change transponder