Operation Manual

Start of operation and configuration
- 21 -
New password
Enter a new password.
Confirm password
Repeat your new password.
After confirming the new password it cannot be cancelled!
5.3.3.6. OSD setting
OSD duration
Select the duration of the OSD overlay.
OSD transparency
Select the transparency of the OSD overlay.
5.3.3.7. Favorite
8 favorite lists are available and can be renamed.
5.3.3.8. Other
LNB power supply
On/off. Preset is activating.
Turn the power supply off in case antenna or cable system without
power supply is connected to the receiver.
Sound signal
Activate/deactivate the acoustic satellite finder signal.
5.3.4.
Setting
5.3.4.1. Information
Open the submenu to view relevant data for the satellite receiver.
5.3.4.2. Default setting
Confirm again to reset to default setting. Please follow the screen
prompts.
Press and hold the standby button on the front of the receiver for 10
seconds to reset to default settings.
5.3.4.3. Software update
Software update is normally not necessary for receiver operation.