Operation Manual

Preparation
- 9 -
16 INFO Accessing program parameters
17 GREEN Function button GREEN
18 V-FMT Changing size of picture / function button RED
19 FAV Favourite lists indicate
20 ▼ Cursor button/ Normal mode: channel change
21 ◄ Cursor button, normal mode: decrease volume
22 OK Confirm the range
23 TEXT View teletext (switch transparent)
24 ▲ Cursor button, normal mode: channel change
25 MENU Menu button
26 RECALL Previous program
27 CH -/+ Previous program /next program
28 TV/ RAD Toggle between TV/RADIO
4. Preparation
4.1. Connection the system
Follow these steps to connect the system:
Ensure that all units are turned off when connecting.
To avoid image interference only connect the satellite receiver via a
video connection to your TV set.
1. Connect the mains power cable to a wall outlet.
2. Connect the TV with the receiver.
Scart, HDMI, RCA, component, 2-channel or coax cable are not
supplied.
You can connect the satellite receiver in several modes to TV set,
recording device (e.g. VCR) and other devices. Find details in chapter
4.1.1.
Heed the user manuals for your TV set ant the other devices.