Operation Manual

Preparation
- 11 -
30 SUB/COPY Selection Subtitle , CD ripping
31 ANGLE Camera-angle setting (disk dependent)
32 PROG Programming
33 MUTE Mute the sound
34 PLAY Start the playback
35 EJECT Open and close the DVD drive
4. Preparation
4.1. Connection the device
Follow these steps to connect the DVD player.
Ensure that all units are turned off when connecting.
1. Connect the TV with the DVD player.
2. Connect the mains power cable to a wall outlet.
No connecting cables are supplied.
You can connect the DVD player in several modes to TV, set
recording device (e.g.: VCR) and other devices. Find details in
chapter 4.1.1.
Heed the user manuals for your TV set and the other devices.
4.1.1. CONNECTION WITH SCART CABLE
1. Connect the SCART cable into the SCART OUTPUT on the DVD
player.
2. Connect the SCART cable
with the TV.
To connect hi-fi systems
connect the cable to the DVD
player‘s R and L connectors.