Operation Manual

External components
- 20 -
6.2. Programming
1. During stop mode, press Program to display program menu.
2. Enter the track numbers and press ENTER.
3. Press PLAY and ENTER to play tracks in the programmed
order.
With 0/10 you can delete a false title, but the cursor must be
at the right place.
6.3. A-B
1. During playback, press A-B for selecting starting point A of loop
sequence.
2. Press again A-B to set the end point.
The sequence between A-B will be repeated.
3. Press A-B (third time) to cancel the set loop sequence.
Not every disc supports this function. For CD and SVCD
playback, A and B must be located within the same track.
For DVD playback, A and B must be located within the same
chapter.
7. External components
7.1. USB 2.0
Extend your system by connecting your MP3 player or USB stick.
Do not disconnect the device when DVD/USB mode is
selected.
1. Connect your MP3 player or USB stick.
2. Press DVD/USB button until „USB“is displayed.