User manual

Version1 cmx® GAc3000 Page 10 of 35
Using Micro -SD card
Two storage medias are displayed after connecting the player to the computer.
The first drive is the built-in memory of the player; the second is the Micro-SD
card. If no card is inserted, the second drive cannot be opened. The player
supports the Micro-SD memory cards between 128MB and 2GB.
Inserting and removing the Micro SD card
Insert the Micro-SD card with the printed side up and carefully press the card.
In this way, the contents of the Micro-SD card can be reproduced.
Carefully press the Micro-SD card; the card then pops out a little and can be
removed.
Caution: Insert and remove the card only when the player is turned off,
otherwise the data in the player may be damaged or lost!
If no card is inserted, the computer cannot run any reading or writing processes
on the second storage medium (Micro SD card).