User manual

Version 2 cmx® PDT 4740 Page 29 from 51
8. DVB-T
Direct digital TV enjoyment with PDT 4102 via the built-in DVB-T module.
8.1. Auto Scan
Repeatedly press the SOURCE button (on the device or on the remote control) until
DVB-T is selected.
Press PBC / SCAN on the remote control.
You are prompted if scanning is to be started. Select OK or Cancel and press
ENTER.
During channel search the progress bar is displayed. On the right hand side the found
channels are displayed. About 3 seconds after finishing the channel search the first
channel is played.
Note
During channel search press PBC / SCAN to cancel scanning.