USER MANUAL RRD 1220 RETRO RADIO DESIGN
Dear customer! First of all thank you very much, that you have decided for the cmx® RRD 1220! Please read all information’s carefully before you start running the cmx® RRD 1220. Our company reserves the right to improve the product. That includes changes to specifications and design, also without notice. If you have problems, please visit our website at www.cmx-electronics.com and select your device.
1. Safety Informations CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash is a warning sign alerting you of „dangerous voltage“ inside the product. The exclamation point is a warning sign alerting you of important instructions accompanying the product. WARNING To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
2. Quick Start Open the battery door and insert 4 AAA batteries. The shelf-life of the AAA batteries is around 1 month. If you want to operate the device with a plug, you have to buy one with DC 4,5 V ( ) at a specialized trade. Switch the button on the backside of the device to “ON”. Is the function switch on “OFF/AL” the radio is off, but the alarm is on. Is the function switch on “AUTO”, the radio will turn on and off automatically. 3. Radio Rotate tuning knob to tune in the desired station.
Press “SET” to adjust hour, minute and music (to adjust the settings, press “UP/SN” and “DOWN”). NOTE: Switch the button on the backside to “OFF/AL”. You can choose between 8 different ringtones. The alarm will ring one minute each time. You can press any key to stop. When you press “SNOOZE” the song will ring 6 minutes later. You have to activate snooze function before! 4.3. Sleep timer Switch the function to “OFF/AUTO”. Press twice “MODE” to enter sleep mode.