User Manual

Network Weatherproof Camera Installation Manual
16 / 20
Enter the user name and password to bring up the web viewer page. The default id and password is
“root” and “admin” respectively.
If you changed the HTTP port number from the default value, put a colon and port number at the end of
the IP address. (For example, enter http://192.168.123.100:8080
when using port 8080.)
<Address format for accessing as an administrator>
(When using default IP address and port number)
http://192.168.123.100
(When using a different IP address and port number) http://IP address: new port number
If you forget the administrator’s password, “Factory Reset” is the only way to regain access.
However, since this will retrieve all default settings, the network settings have to be
configured again using the IP installer.
For security, please change the administrator’s id and password from their default values. Please
save the changed ID and password in a place only accessible by an administrator. Please refer to
[Web Viewer Manual] for detail.