Instruction Manual

71
BDx-Series Installation & User’s Manual
3. PTZ / color adjustment mode
Control Pan / Tilt / Zoom..
PAN/TILT control is available when controller such as Rx Receiver is installed.
If you click PTZ control button in live mode, the following control screen appears.
You click this
button to switch to live mode.
‘Use PTZ’ shall be checked in ‘setup’ -> ‘camera’ for Pan/Tilt control and in case
plural cameras are connected, you select camera connected with Pan/Tilt driver using
this
button.
The following features are offered according to such as camera, Rx receiver and housing
Item Features
Camera Zoom In / Out, Iris Open / Close, Focus,
Housing Light On/Off
Receiver
PAN(Left/Right), TILT(up/down), Auto PAN, Auto TILT, Auto PAN/TILT, Camera Power,
Preset position