Pure sine wave inverter Product Manual
Pure sine wave inverter The inverter Installer must be professional, for the high pressure in the inverter, no-professional person please do not open it. The inverter should be installed at a dry, well ventilated environment and keep it more than 20cm away from the wall to avoid clogging its inlet. Do not expose the inverter to the heat,moisture, flammable, explosive, corrosive environment, dry cloth cleaning, avoiding water. 1. Load power did not exceed the inverter's rated power.
Pure sine wave inverter 2. Switch in the OFF position before connecting the power, the power upply use battery, solar power system, DC power supply, connect the power to confirm if the input of the inverter nominal DC voltage is consistent with the power supply DC voltage, avoiding excessive voltage input inverter. 3. The inverter for off-grid power, AC output cannot be connected to other power supply(electricity). Before using, the inverter shall be connected to the earth.
Pure sine wave inverter 5. City electricity complementary series inverter, which internal have the AC bypass function, please connect the AC power correctly. 6. Please read above carefully, if you have the unclear point, please call our after-sales service to consultation. Not in accordance with the installation of this manual method of operation may cause personal injury or cause damage to machinery and equipment. 7.
Pure sine wave inverter internal temperature is above about 75 ℃, the machine shut down output, buzzer and lights at the same time work. Short-circuit protection: output short circuit, the machine shut down output, buzzer and lights at the same time work. Anti-anti-connect protection: when input positive and negative poles reversed, the diode anti-anti-burn fuse to protect the inverter, need to replace the fuse, MOS FET anti -anti-connect inverter does not work: can be work after reversed.
Pure sine wave inverter 2 3 1 Description: 1. Red is the DC input positive pole 2. Black is the DC input negative pole 3. Cooling fan 9. 500~1000WPanel indicate diagram: 2 1 3 4 5 1 3 2 - 05- Description: 1. Blue: inverter working light 2. Red: fault light 3. Power on switch 4. AC output socket 5. USB port Description: 1. Red is the DC input positive pole 2. Black is the DC input negative pole 3.
Pure sine wave inverter 10、1500~2500WPanel indicate diagram: 2 1 3 4 5 6 1 3 2 4 Description: 1. Blue: inverter working light 2. Red: fault light 3. Power on switch 4(5). AC output socket 6. USB port Description: 1. Red is the DC input positive pole 2. Black is the DC input negative pole 3. Cooling fan 11、3000~8000WPanel indicate diagram: 2 1 3 6 4 7 5 - 06- Description: 1. Blue: inverter working light 2. Red: fault light 3. Power on switch 4(5). AC output socket 6. USB port 7.
Pure sine wave inverter 2 Description: 1. Red is the DC input positive pole 2. Black is the DC input negative pole 3. Cooling fan 1 3 12. Wiring diagram: red Battery pack Us e Load black 1o 3f .
Pure sine wave inverter 12. Troubleshooting: 1) Inverter did not respond: check the connect condition,reconnect the wire;check the positive and negative pole to confirm connected correctly,reconnect properly, replace the fuse. 2) Alarm red with no output. Check the voltage is higher or lower than the inverter's rated voltage range, replace the battery or control the voltage in the range. Check the temperature, if too high, cooling the inverter and put it in a ventilated place.
Pure sine wave inverter Products within 7 days from date of purchase have any problem, free exchange of new machines, man -made damage the casing or packaging is not in the exchange range. This manual is only used to guide the use and can't represent their products exactly the same. If any problem, please consult our technical service department, and it will be solved with the guidance of professional engineers.
Pure sine wave inverter PRODUCT CERTIFICATION Inspection: Factory inspector: Date: Users stubs To protect your rights，please fill in the following blackcarefully..
Pure sine wave inverter
