Product Manual

- 08-
Pure sine wave inverter
12. Troubleshooting:
1) Inverter did not respond: check the connect
condition,reconnect the wire;check the positive and
negative pole to confirm connected correctly,reconnect
properly, replace the fuse.
2) Alarm red with no output. Check the voltage is
higher or lower than the inverter's rated voltage range,
replace the battery or control the voltage in the range.
Check the temperature, if too high, cooling the inverter
and put it in a ventilated place. Check the load power,
if too high, please remove part of the load power and
restart the inverter. Check the output, eliminate the
short circuit condition and restart. Check the wire, if
too short, replace it. Open fail, then restart.
13. This product is guaranteed for one year from
date of purchase If artificially damaged, disassemble
or modify, the Company is not responsible for warranty.