User's Manual

Click the X (Close) button in the upper right corner to exit the WLAN Monitor.
5.4 Create a New Profile
5.4.1 On the Profile screen, as shown in Figure 5-2, click the Add button to create a new profile.
When the Add Profile screen appears (Figure 7-9), enter a name for the new profile. Click
OK to save the profile name or click Cancel to return to the previous screen.
Fig 5-3 Add Profile
5.4.2 Fill the following information.
SSID: Fill the SSID or unique of the wireless network
Network Type: There are two wireless modes.
(A) Access Point - This mode allows wireless and wired networks to communicate through an
access point.
(B) Peer to Peer - This mode allows wireless-equipped computers to communicate directly with
each other. No access point is used.