User's Manual

13
˙ Setup
The Setup screen shows the basic configuration parameters for your router, such as Host
Name, LAN IP Address, and PPPoE Login.
Although most users will be able to accept the default settings, every Internet Service Provider
(ISP) is different. Check with your ISP if you're not sure which settings they require.
The Setup screen is shown in the figure below.
To configure Setup parameters:
1. Type the Host Name (optional). This value is sometimes called System Name or Account Name.
Check with your ISP if you’re not sure whether to provide this information.
2. Type the Domain Name of your ISP, such as xyz.isp.com (optional). Check with your ISP if
you’re not sure whether to provide this information.
3. Review the Firmware Version. This value tells you the version number and date of the firmware
you are currently using.